Micro Mist Spray Dryer
Four-fluid nozzle Micro Mist Spray Dryer (MMSD)
Micro Mist Spray Dryer for Laboratory
MDL Micro Mist Spray Dryer
Few microns fine powder for research is attained easily by using MDL series.
We have various types to meet your demands.
Features
- •Powders can be attained from a little specimen.
- •Spray drying state can be checked by its glass chamber.
- •Simple disassembly and setup. Easy cleaning.
- •Easy to handle and check operation by the touch panel.
What is micro mist spray dryer?
- •Spray dryer is a device that instantly dries the atomized droplet by the hot air and making them into a powder.
- •Atomized droplet is called "spray" if the diameter is over 10µm, and the one with diameter below 10µμm is called "mist".
- •The device that stores "Atomizing nozzle", which can atomize massive "mist" is called "micro mist spray dryer".
Basic specification
- •Water evaporation capacity: 3L/h
- •Atomizing method: Four-Fluid nozzle, straight edge
- •Drying method: Upper part hot air co-current type
- •Exhaust fan: inverter controlled, maximum 1.5m3/min
- •Hot air generator: electric heater 4kw
- •Hot air temperature: 40°C to 200°C, temperature control accuracy of ±1°C
- •Solution sending pump: roller pump, maximum 50ml/min
Features of micro mist spray dryer
- •Produce high-capacity finr powder in few microns.
- •Short residence time inside the product, and its structure is smaller.
- •Good heat efficiency by setting the low sexhaust temperature.
- •Get rid of pulverizing and classifying process.
- •Dry the liquid material, which is difficult to get dried.
- •Low temperature drying below boiling point.
- •Smoothly planning of research to production is possible.
Simple type that collects by the bag filter at the bottom.
- Specification
- Collecting method:
- Bag filter
Continuous collecting type by the bag filter unit
- Specification
- Collecting method:
- Cyclone / Bag filter